Enlarge01 / Primary EvidencePASS
CE EMC Test Report
Broadest scope of the three: emissions and immunity, covering both the EU and EEA markets.
Booster Robotics builds humanoid platforms for research, education and industrial deployment. Every platform is tested against the electromagnetic compatibility requirements of the markets it is sold into, and the scope of that evidence is published model by model rather than as a single blanket claim.
The certificates below reproduce page one of each issued report. Complete signed reports — including test-data annexes and accreditation pages — are released with the quotation package during supplier qualification.
Ordered by scope. The Booster K1 carries a matched pair of European EMC and United States FCC reports issued on the same date; the Booster T2 entry is a single-market, configuration-specific record. Click any certificate to enlarge it.
EnlargeBroadest scope of the three: emissions and immunity, covering both the EU and EEA markets.
EnlargeSame model, same laboratory and the same issue date as the CE EMC report, forming a matched EU and US evidence pair.
EnlargeThe most recent document on file. Scope is limited to the configuration recorded in the report.
Every item below is recorded as Pass in the corresponding report. The full measurement data, equipment list and chamber photographs sit in the annexes of the issued documents.
| Document | Test item | Standard / method | Result |
|---|---|---|---|
| CE EMC · K1 | Radiated emissions, 30 MHz – 1 GHz | CISPR 16-2-3:2016 +A1:2019 +A2:2023 | PASS |
| CE EMC · K1 | Radiated emissions, above 1 GHz | EN IEC 61000-6-4:2019 | PASS |
| CE EMC · K1 | Electrostatic discharge | EN 61000-4-2:2009 — ±4 kV contact, ±8 kV air | PASS |
| CE EMC · K1 | Radiated immunity, 80 MHz – 1 GHz and 1.4 – 6 GHz | EN IEC 61000-4-3:2020 — 10 V/m and 3 V/m, 80% AM 1 kHz | PASS |
| FCC · K1 | Radiated emissions, 30 MHz – 1 GHz | ANSI C63.4-2014, 15.109(b), Class A | PASS |
| FCC · K1 | Radiated emissions, above 1 GHz | ANSI C63.4-2014, 15.109(g), Class A | PASS |
| FCC · T2 | Conducted emissions at mains terminals, 150 kHz – 30 MHz | ANSI C63.4-2014, Class A | PASS |
| FCC · T2 | Radiated emissions, 30 MHz – 1 GHz | ANSI C63.4-2014, Class A | PASS |
| FCC · T2 | Radiated emissions, above 1 GHz | ANSI C63.4-2014, Class A | PASS |
Signed reports are not published as downloads. They are released together with the commercial documents, so that what you receive matches the unit you are buying.
Check the published scope against your destination market and the environment the robot will work in. The table below lists what exists for each model.
Model, accessory set and firmware revision are fixed before the report is applied, because compliance evidence is configuration-specific.
The complete report is supplied with the quotation package and supplier onboarding file, including signature and accreditation pages.
| Booster T1 Humanoid Robot | Documentation-based: CE, FCC, CB, KC (Korea), MIC (Japan), WPC (India); battery UN38.3. Listed in the published product literature; reports are released during supplier qualification. |
|---|---|
| Booster K1 Humanoid Robot | Reports on file: CE EMC emissions and immunity, plus FCC Part 15 Subpart B Class A, both issued 2025-07-18. View the document library ↑ |
| Booster T2 Humanoid Robot | Report on file: FCC Part 15 Subpart B Class A, configuration-specific, issued 2026-07-10. View the T2 entry ↑ |
| DR-02, Jueying, Lynx, DawnAnt and wheeled dual-arm platforms | — No compliance document on file for publication. Model documentation should be reviewed before shortlisting. |
A document is listed here only when the issued report has been verified for the exact model named. Market-access requirements vary by destination and by configuration, so check the applicable scope before writing a project specification.
Compare specifications, deployment scenarios and the compliance scope published for each model before you write your project specification.
Explore Products Read the Buying Guide